BD200 Self-Contained Maxi Horizontal Directional Drill

Built for exceptional performance, the Barbco BD200 directional drill delivers 200,000 lbs. of thrust and pulling force and achieves a pulling speed of 140 ft. per minute. Our rigs provide the power you need for long crossing installations with the small footprint that’s ideal for wooded or remote jobsites. Built with an on-board 540-horsepower engine, the BD200 achieves 35,000 ft. lbs. of torque.

Request a Quote

35,000

FT. LBS. TORQUE

200,000

POUNDS OF THRUST

Safety Features

Operator in Mind
Designed with the operator’s comfort and movement in mind, we offer a spacious enclosed cab with internal climate control and easy-to-operate controls.
Maintain Communication
Maintain communication inside and outside the cab with a built-in audio package.
Track Your Position
Track your position and other critical bore information with a built-in, multi-function DCI display.

Standard Features

Designed For Your Comfort
Designed for your comfort, we equip our mid-size drills with a spacious, climate-controlled operator’s station built with state-of-the-art displays and an easy-to-handle joystick.

Wireline Ready
Built wireline-ready with a side entry sub and in-cab terminals.

Traveling Breakout Wrenches
Our BD200 come standard with traveling breakout wrenches.

Optional Features

Maintain Communication
Maintain communication inside and outside the cab with a built-in audio package.

Track Your Position
Track your position and other critical bore information with a built-in, multi-function DCI display.

Track Your Position
Track your position and other critical bore information with a built-in, multi-function DCI display.

Manufacturer Comparison

Model	Horsepower	Torque	Thrust
24/30-150	46	29,870	150,000
30 Power Plus	45	28,724	200,000
30/36B	48	25,500	230,000
30/36-200	64	39,679	209,230

Product Specifications

Power Train
Engine	Deutz D2011L04I Air Cooled Diesel with Electric Start
	64.1 HP @ 2,800 RPM Continuous Duty Rating
	140.14 Ft. Lb. Peak Torque @ 1,700 RPM
Clutch	10-inch Diameter
Auger Drive	3" Hex Drive

Transmission
Type	T-18 4 Speed
1st Gear	6.32:1 Ratio
2nd Gear	3.09:1 Ratio
3rd Gear	1.69:1 Ratio
4th Gear	1.00:1 Ratio
Reverse	7.44:1 Ratio

Maximum Output Torques and Auger Speeds
1st Gear	39,679 ft-lbs. @ 6 RPM
2nd Gear	19,400 ft-lbs. @ 12.28 RPM
3rd Gear	10,610 ft-lbs. @ 22.45 RPM
4th Gear	6,278 ft-lbs. @ 37.94 RPM
Reverse	46,710 ft-lbs. @ 5.10 RPM

Gearbox
Fairfield S10B	44:8:1 Ratio

Hydraulic System
Pump	Danfoss K38C – 26.6 GPM @ 2,800 RPM
	3,770 PSI Continuous/5,075 PSI Intermittent
	Pressure Compensated Load Sensing System
Cylinders	Two 6" Bore x 36" Stroke
	209,230 Lb. @ 3,700 PSI
	286,984 Lb. @ 5,075 PSI Intermitten^*
Work Range	4" through 36"

Filters
Return	10 Micron Replaceable Element

Dimensions - 30" Mode
Center Line	19"
Height	51.75"
Width	48"
Length	120"

Dimensions - 36" Mode
Center Line	22"
Height	54.75"
Width	48"
Length	120"

Weights
Base Unit	2,500 lbs.
Sub-Frame	2,400 lbs.
Master Track	1,160 lbs.
Extension Track	1,050 lbs.
30" Master Pusher	673 lbs.
36" Master Pusher & Lift Kit	900 lbs.

*Pump life expectancy diminishes rapidly. May void warranty.