BD380TM Umbilical Maxi Horizontal Directional Drill

Looking for maximum performance? Look no further than the Barbco BD380TM directional drill. Designed to tackle large diameter drilling projects, the BD380TM produces a whopping 380,000 lbs. of pulling force and a top speed of 100 ft. per minute. Boasting extreme power for your toughest job, the multi speed rotary system delivers a robust 60,000 ft. lbs. torque and rotates at 95 rpm maximum. The BD380 weighs 88,000 lbs. and measures at 102 in. wide with expandable catwalks. The rig can be trailer-mounted or track-mounted, depending on your worksite needs.

Request a Quote

700

HORSEPOWER

60,000

FT. LBS. TORQUE

380,000

POUNDS OF THRUST

Safety Features

Operator in Mind
Designed with the operator’s comfort and movement in mind, we offer a spacious enclosed cab with internal climate control and easy-to-operate controls.
Maintain Communication
Maintain communication inside and outside the cab with a built-in audio package.
Track Your Position
Track your position and other critical bore information with a built-in, multi-function DCI display.

Standard Features

Additional Safety
For additional safety, all rig sensors are capable of override, and the valves can be controlled from the power unit, if needed.

Operator’s Station Features
The operator’s station features a climate controlled cabin with two seats and dual displays.

Cabin Controls
The cabin controls are equipped with automated drilling modes and a unique customized driller’s interface that allows for up to three personalized screens dashboards, and joystick functions.

Tandem Axle
The tandem axle has an adjustable entry angle from 8 to 14 degrees and an automated rod handler with pipe supports.

Manufacturer Comparison

Model	Horsepower	Torque	Thrust
24/30-150	46	29,870	150,000
30 Power Plus	45	28,724	200,000
30/36B	48	25,500	230,000
30/36-200	64	39,679	209,230

Product Specifications

Power Train
Engine	Deutz D2011L04I Air Cooled Diesel with Electric Start
	64.1 HP @ 2,800 RPM Continuous Duty Rating
	140.14 Ft. Lb. Peak Torque @ 1,700 RPM
Clutch	10-inch Diameter
Auger Drive	3" Hex Drive

Transmission
Type	T-18 4 Speed
1st Gear	6.32:1 Ratio
2nd Gear	3.09:1 Ratio
3rd Gear	1.69:1 Ratio
4th Gear	1.00:1 Ratio
Reverse	7.44:1 Ratio

Maximum Output Torques and Auger Speeds
1st Gear	39,679 ft-lbs. @ 6 RPM
2nd Gear	19,400 ft-lbs. @ 12.28 RPM
3rd Gear	10,610 ft-lbs. @ 22.45 RPM
4th Gear	6,278 ft-lbs. @ 37.94 RPM
Reverse	46,710 ft-lbs. @ 5.10 RPM

Gearbox
Fairfield S10B	44:8:1 Ratio

Hydraulic System
Pump	Danfoss K38C – 26.6 GPM @ 2,800 RPM
	3,770 PSI Continuous/5,075 PSI Intermittent
	Pressure Compensated Load Sensing System
Cylinders	Two 6" Bore x 36" Stroke
	209,230 Lb. @ 3,700 PSI
	286,984 Lb. @ 5,075 PSI Intermitten^*
Work Range	4" through 36"

Filters
Return	10 Micron Replaceable Element

Dimensions - 30" Mode
Center Line	19"
Height	51.75"
Width	48"
Length	120"

Dimensions - 36" Mode
Center Line	22"
Height	54.75"
Width	48"
Length	120"

Weights
Base Unit	2,500 lbs.
Sub-Frame	2,400 lbs.
Master Track	1,160 lbs.
Extension Track	1,050 lbs.
30" Master Pusher	673 lbs.
36" Master Pusher & Lift Kit	900 lbs.

*Pump life expectancy diminishes rapidly. May void warranty.